The small and medium fully automatic numerically-controlled rebar bending machines have been promoted on construction sites. The professional technicians of Kairien Machinery Manufacturing Co., Ltd. tell you the composition of the small and medium-sized fully-automatic numerically-controlled steel rebar bending machines. The traditional rebar processing is divided into three types. First, the machine is used to straighten the steel bar, twist it into the desired shape, and finally cut it off with a sharp cut.
The
CNC Rebar Bending Machine process is very similar to the traditional method. It consists of four components: the first is the feeding section of the rebar, and the second is some straightening. The first two are driven by a group of four-volt motor systems. The third is that the turning and blocking are driven by another group of four-volt motor systems. Finally, there are some computer controls that use industrial control. These four parts constitute an organic whole and are highly mechatronic products.
Inquiry Basket ( 0 )
